Outdoor In-Ground Banner Frame Kits
Give your message a standalone display anywhere outdoors, no fence, wall, or building required. Our outdoor banner frame kits combine a powder-coated steel frame with a full-color banner, ready to stake into the ground alongside a busy street, parking lot, or event space.
Helpful Resources
What's in the Kit
Your Banner
Choose Mesh Vinyl, Outdoor/Heavy Duty Vinyl (18 oz), or Double Sided Vinyl (18 oz), finished with heat-welded hems and grommets.
Steel Frame Hardware
1" diameter steel tubing with black powder coating, flanged tubes with interlocking buttons for quick assembly.
Ground Stakes & Bungees
Everything needed to stake the frame into the ground and secure the banner in place, no separate hardware purchase required.
Sizes & Options
Available in two frame sizes, 3'x6' and 4'x8' (the sizes describe the banner within the frame; the assembled frame itself stands roughly 8 feet tall). Choose single-sided (one banner) or double-sided (two banners hung back to back). Need just a new banner for a frame you already own? Select the Replacement Banner Only option.
Rated for winds up to 25 mph. To stay within warranty, bring the frame indoors when winds exceed that, or add guy wires for extra stability. Choosing a mesh banner also improves performance in wind since air passes through instead of catching the banner.
Sizing tolerance: finished dimensions may vary by up to 1" on small format banners, or up to 10% on large format banners. Grommets are placed 0.5" from the vinyl edge; keep essential text and logos at least 1.75" inside the edge (the safe zone) so nothing is trimmed or obscured by a grommet.
Why Buy Your Outdoor Banner Frame From Us
Sturdy Steel Frame
Powder-coated, interlocking tubing
Portable & Easy to Assemble
No tools or permanent install needed
Reusable Banner Slot
Swap the banner without replacing the frame
6-Month Hardware Warranty
Covers the frame under normal use
Because the frame is reusable, you can order a Replacement Banner Only for a fraction of the cost whenever your message changes, rather than buying a whole new kit. Note that the banner and hardware ship separately.
Artwork & Design
For best print quality, we recommend a minimum resolution of 100 ppi at full print size (for example, a 36"x72" print needs an image at least 3600x7200 pixels). Art is scaled slightly to properly fit the frame, download the correct template for your frame size below.
Care & Storage
Clean your banner with a mild soap and water mix using a soft, non-abrasive rag. Avoid scrubbing. To store it, roll the banner with the ink side facing in and place it back in the shipping carton. Store rolled banners upright in a cool, dry area.
Frequently Asked Questions
- How tall is the assembled frame?
- The final assembled kit stands roughly 8 feet tall. The 3'x6' and 4'x8' sizing describes the banner that sits inside the frame.
- What wind conditions can this frame handle?
- It's rated for winds up to 25 mph. To stay within warranty, bring it indoors above that, or add guy wires for higher-wind settings. A mesh banner also performs better in wind than solid vinyl.
- Can I order just a replacement banner?
- Yes. Choose the Replacement Banner Only option if you already own the frame and just need a new banner.
- Do the banner and frame ship together?
- No, the banner and hardware ship separately.
- Is the hardware covered under warranty?
- Yes, the frame hardware includes a six-month warranty when used within the rated wind conditions.
